Teach you how to tell a pure ox leather belt hand by hand
The first verification method is by water dropping
The first step is to drop a water on the belt, as shown in the picture
The second step is to properly bend the belt. If it is pure leather, there would be pores on the surface and the water would osmosis.
Do several times, all the water would osmosis.
Of course, now the well imitated leather has this feature, and those having a pure leather layer also get this feature.
The second method is to verify the softness
The real pure leather has good touching feeling with high softness
The third method is to tear
The real pure ox leather contains high percentage of natural fiber. Although it is cut a mouth by scissors, it is hard to tear it up. Of course no one will try to damage his own belt. Editor will teach you a method to verify without damaging the belt.
The first step is to turn back the belt and get away the screw by screwdriver
The second step is to cut a mouth by scissor
Next is to tear it hard to see whether it can be torn up
The forth method is to check if there are interlayer
In the third method, after the belt is cut a mouth, then check if the belt has interlayer. The real pure ox leather does not.
The fifth method is to burn
Following the third method, take out the leather a little and burn it
The pure ox leather is a little uglier than PU. When burning the pure leather, there comes the white smoke with a smell similar like burning the hairs. As for the PU, there comes the black smoke with heavy plastic smell.
The sixth method is to watch the ash after burnt
The ash of pure leather after burning can twist into powder while PU after burning is like bulks
After these methods, everyone can tell whether the belt bought is pure ox leather or not.